The pressure transducer calibration kit uses an analog manometer to calibrate an MPS20N0040D pressure transducer using 2.5mm tubing and a tee junction. When the tee junction is put under a given pressure, the manometer water level changes accordingly, as does the signal produced by the pressure transducer. The water level can be measured and approximated as a pressure (-2kPa - +2kPa measurement range).
Included in the Pressure Transducer Calibration Kit:
1x 3D Printed Manometer
2.5mm x 4mm Tubing (3m in length)
1x MPS20N0040D Pressure Transducer
4mm Tee Junction
4x Jumper Wires
1x Mini Breadboard
Some Features of the Pressure Transducer Kit:
-2kPa to 2kPa Calibration Range from Manometer
0kPa - 30kPa (approximate) Operating Range for MPS20N0040D
4mm Tee Junction Connects MPS20N0040D and Manometer
MPS20N0040D compatible with Arduino + Raspberry Pi
MPS20N0040D Operates at 5V
The pressure transducer calibration kit uses an analog manometer to calibrate an MPS20N0040D pressure transducer using 2.5mm tubing and a tee junction. When the tee junction is put under a given pressure, the manometer water level changes accordingly, as does the signal produced by the pressure transducer. The water level can be measured and approximated as a pressure (-2kPa - +2kPa measurement range).
Included in the Pressure Transducer Calibration Kit:
1x 3D Printed Manometer
2.5mm x 4mm Tubing (3m in length)
1x MPS20N0040D Pressure Transducer
4mm Tee Junction
4x Jumper Wires
1x Mini Breadboard
Some Features of the Pressure Transducer Kit:
-2kPa to 2kPa Calibration Range from Manometer
0kPa - 30kPa (approximate) Operating Range for MPS20N0040D
4mm Tee Junction Connects MPS20N0040D and Manometer
MPS20N0040D compatible with Arduino + Raspberry Pi
MPS20N0040D Operates at 5V
