MPXV7002DP Differential Pressure Sensor

$20.00
sold out

UPDATE: The supply chain for the MPXV7002DP is currently broken, thus we have developed a similar sensor called the XGMP3v3 Differential Pressure Sensor, which behaves in a similar manner as the MPXV7002DP.

The MPXV7002DP is a differential pressure sensor that is often paired with a pitot tube to measure the airspeed of drones and small aircraft. The MPXV7002DP can also be used to measure local pressures in pipes and enclosures where fluid is flowing, without the need for a pitot tube. The differential pressure sensor is also great for measuring the speed of enclosed flows over a venturi meter - where the area of the enclosure changes.

Included in the MPXV7002DP Package:

  • 1x MPXV7002DP Differential Pressure Sensor

  • 1x Breakout Cable (3-Pin)

Features of the MPXV7002DP Differential Pressure Sensor:

  • -2 kPa - +2 kPa Measurement Range

  • 5V Supply Voltage

  • ~0.1mA Power Consumption

  • 1.0 V/kPa Sensitivity

  • 1ms Response Time

  • Analog Output: 0.5V - 4.5V

  • 2.5% Reading Error

  • 75 kPa Maximum Pressure Tolerance (On each Port)

  • Fits best with 2.5mm Inner Diameter (I.D.) Tubing

  • Arduino/Raspberry Pi Compatible

  • Full Datasheet can be found here

Get notified by email when this product is in stock.

UPDATE: The supply chain for the MPXV7002DP is currently broken, thus we have developed a similar sensor called the XGMP3v3 Differential Pressure Sensor, which behaves in a similar manner as the MPXV7002DP.

The MPXV7002DP is a differential pressure sensor that is often paired with a pitot tube to measure the airspeed of drones and small aircraft. The MPXV7002DP can also be used to measure local pressures in pipes and enclosures where fluid is flowing, without the need for a pitot tube. The differential pressure sensor is also great for measuring the speed of enclosed flows over a venturi meter - where the area of the enclosure changes.

Included in the MPXV7002DP Package:

  • 1x MPXV7002DP Differential Pressure Sensor

  • 1x Breakout Cable (3-Pin)

Features of the MPXV7002DP Differential Pressure Sensor:

  • -2 kPa - +2 kPa Measurement Range

  • 5V Supply Voltage

  • ~0.1mA Power Consumption

  • 1.0 V/kPa Sensitivity

  • 1ms Response Time

  • Analog Output: 0.5V - 4.5V

  • 2.5% Reading Error

  • 75 kPa Maximum Pressure Tolerance (On each Port)

  • Fits best with 2.5mm Inner Diameter (I.D.) Tubing

  • Arduino/Raspberry Pi Compatible

  • Full Datasheet can be found here