e-Paper Display for Arduino (1.54in, 200x200 Pixels)

$20.00
sold out

Electronic paper, known as e-Paper, is a common technology used in devices such as the Amazon Kindle and Nook eReaders and eBooks. The e-Paper module here uses SPI to communicate with Arduino boards and display text at very low power consumption. e-Paper is highly advantageous for displays that update very infrequently, as they can retain the last printed image on their screen even in the absence of power. The e-Paper module here can be powered via 3.3V or 5.0V, and is compatible with Arduino boards.

Included in the e-Paper Display for Arduino Package:

  • 1x 1.54 inch e-Paper Display Module (200x200 Pixels)

  • 1x JST XH 2.54mm to Dupont 8-Pin Connector

Features of the 1.54in e-Paper Display Module:

  • Module Dimensions: 40mm x 55mm

  • Active Area Dimensions: 1.09 in. x 1.09 in. [1.54 in. Diagonal]

  • 1.8V-5.3V Supply Voltage

  • Power Consumption Profiles @ 3.3V:

    • 3mA Idle Current

    • 2mA - 7mA Update Current

  • Resolution: 200 x 200 Pixels (~185 dpi)

  • Full/Partial Refresh Capabilities

  • Max Refresh Rate ~2 seconds (Partial), ~5 seconds (Full)

  • SPI Interface (Compatible with Arduino and Raspberry Pi)

  • See our tutorial interfacing the e-Paper display and Arduino!

Get notified by email when this product is in stock.

Electronic paper, known as e-Paper, is a common technology used in devices such as the Amazon Kindle and Nook eReaders and eBooks. The e-Paper module here uses SPI to communicate with Arduino boards and display text at very low power consumption. e-Paper is highly advantageous for displays that update very infrequently, as they can retain the last printed image on their screen even in the absence of power. The e-Paper module here can be powered via 3.3V or 5.0V, and is compatible with Arduino boards.

Included in the e-Paper Display for Arduino Package:

  • 1x 1.54 inch e-Paper Display Module (200x200 Pixels)

  • 1x JST XH 2.54mm to Dupont 8-Pin Connector

Features of the 1.54in e-Paper Display Module:

  • Module Dimensions: 40mm x 55mm

  • Active Area Dimensions: 1.09 in. x 1.09 in. [1.54 in. Diagonal]

  • 1.8V-5.3V Supply Voltage

  • Power Consumption Profiles @ 3.3V:

    • 3mA Idle Current

    • 2mA - 7mA Update Current

  • Resolution: 200 x 200 Pixels (~185 dpi)

  • Full/Partial Refresh Capabilities

  • Max Refresh Rate ~2 seconds (Partial), ~5 seconds (Full)

  • SPI Interface (Compatible with Arduino and Raspberry Pi)

  • See our tutorial interfacing the e-Paper display and Arduino!