16-Pixel RGB LED Ring Light

$15.00
sold out

The RGB LED ring light uses an array of 16 surface mounted light-emitting diodes that are programmable by Raspberry Pi computers, Arduino boards, and Raspberry Pi Pico microcontrollers. The RGB LEDs used in the 16-pixel ring light are similar to the common WS2812B LEDs. Each LED is individually addressable, which allows users to control all 16 LEDs. Each RGB LED can be altered using 24-bit configuration commands, which results in 16,777,216 possible colors for each LED.

Included in the 16-Pixel RGB LED Ring Light:

  • 1x 16-Pixel RGB LED Ring

  • 1x 3D-Printed Enclosure (Translucent Dome, Black Backing Plate)

Features of the 16-Pixel RGB LED Ring Light:

  • 16 RGB LEDs Soldered to PCB Ring

  • 5V Supply Voltage

  • 0.55A Max Current Consumption (35mA per LED)

  • Dimensions:

    • PCB: 72mm Radius, 3mm Thickness

    • Enclosure: 78mm x 88mm x 10mm

  • All 16 LEDs are Individually Addressable

  • 16,777,216 Possible Colors Per LED

  • Only 3-Wires Required for Control and Power

  • 3D-Printed Enclosure Allows for Holding and Attaching (M3 Screw)

  • Compatible with Arduino, Raspberry Pi, Raspberry Pi Pico

  • Tutorial with Raspberry Pi Pico

Get notified by email when this product is in stock.

The RGB LED ring light uses an array of 16 surface mounted light-emitting diodes that are programmable by Raspberry Pi computers, Arduino boards, and Raspberry Pi Pico microcontrollers. The RGB LEDs used in the 16-pixel ring light are similar to the common WS2812B LEDs. Each LED is individually addressable, which allows users to control all 16 LEDs. Each RGB LED can be altered using 24-bit configuration commands, which results in 16,777,216 possible colors for each LED.

Included in the 16-Pixel RGB LED Ring Light:

  • 1x 16-Pixel RGB LED Ring

  • 1x 3D-Printed Enclosure (Translucent Dome, Black Backing Plate)

Features of the 16-Pixel RGB LED Ring Light:

  • 16 RGB LEDs Soldered to PCB Ring

  • 5V Supply Voltage

  • 0.55A Max Current Consumption (35mA per LED)

  • Dimensions:

    • PCB: 72mm Radius, 3mm Thickness

    • Enclosure: 78mm x 88mm x 10mm

  • All 16 LEDs are Individually Addressable

  • 16,777,216 Possible Colors Per LED

  • Only 3-Wires Required for Control and Power

  • 3D-Printed Enclosure Allows for Holding and Attaching (M3 Screw)

  • Compatible with Arduino, Raspberry Pi, Raspberry Pi Pico

  • Tutorial with Raspberry Pi Pico